Viroguard Specifications
THE COMPLETE SOLUTION TO YOUR ROOFTOP GREASE
PROBLEMS FULLY TESTED IN THE COLDEST, HOTTEST &
MOST EXTREME CLIMATES!!
UL Listed (See Logo Below)
--
Lifetime Stainless Steel.
The ViroGuard ROOFTOP GREASE/OIL
COLLECTION/CONTAINMENT SYSTEM is made from 16
gauge, 304 stainless steel made to last a lifetime and to always looks
great below your fan!
--
Custom Hinge Kits.
The ViroGuard includes complete custom
Virospec hinge kits.
--
Rainshield Hinges.
The ViroGuard includes Stainless steel hinges
on all rainshields.
--
High Rainfail Capacity.
The ViroGuard has over 5 cubic feet of
capacity for standard 6' units (able to handle in excess of a 10-15"
rainfall or more with the rainshields in place).
--
Resistant Ball Valve.
PVC custom ball valve resists grease, water
and the weather to last a lifetime.
--
Limited Lifetime Warranty.
Limited lifetime warranty against
factory defects.
--
No Messy Pads.
The ViroGuard has no more messy pads to
maintain and dispose of.
--
Flush and Drain Maintenance.
The ViroGuard required no service
contracts to change pads or rocks, your exhaust cleaning company
simply flushes and drains the unit during their normal cleaning visit.
--
Roof Protection.
The ViroGuard also protects your roof both
between
and (unlike other units on the market)
during
the exhaust
system maintenance cleaning protecting both your roof and the
environment! You do
not
have to cover or remove the unit and run
the grease onto the roof like other units! It's your cleaning
company's dream protection unit!
--
No Grease Leakage.
The ViroGuard unit can be plumbed back into
the grease stack eliminating any potential for grease leakage on
roof, simply open the valve when cleaning the system and it drains
back into to grease exhaust system.
--
Standard Plumbing Fittings.
Unit can be plumbed with a standard
1-1/2" hose bard to fit standard industrial vacuum hoses so unit can
be run down to wet vac or to bucket during cleaning.
--
Drain Location.
The ViroGuard unit can also be run to nearest
drain with a standard 1-1/2" vac hose (not recommended unless
sanitary sewer).
--
Rainshield Features.
The ViroGuard RAINSHIELD edge sits 1-2"
above the base of the fan on most fans (or on the bowl on Breeder
style fans) to allow grease leakage from the base of the fan to run
into unit while keeping most of the rain out.
--
Seamless Welds.
Seamless welded unit does not allow any grease
to reach roof area.
--
No More Outside Grease Leakage.
The ViroGuard fits on outside,
top and into the grease exhaust stack leaving no areas unprotected
and fixing most curb installation problems. No more leakage
between the containment unit and the roof and no more flimsy
flashings required.
--
Convenient Size and Location Standards.
The ViroGuard is a
convenient size to allow easy access to the grease exhaust for
cleaning only extending out approx. 10" from the curb allowing
servicing without having to protect or stand on the unit.
--
Easy Bucket Draining.
In extreme cases, the ViroGuard can be
easily drained off into a bucket on the roof from the drain barb if
you are late for you normal cleaning cycle. It should never need
service between normal cleanings.
Additional ViroGuard Information